Dette innovative systemet er basert på mottrykksystem du finner i kommersielle tappelinjer og gir en rask gjennomstrømning av øl. Du kan fylle en 2 liters growler på et minutt noe som gir god kundehåndtering.
Pegas CrafTap 3.0 bruker et unikt system som lar brukeren regulere hvor mye skumming ølet gir. Dette gjør at utsalgsstedene reduserer svinn ned til 2-0% samtidig som de bruker 98-100% av ølet som er i fatene.
Man beholder den opprinnelige kvaliteten og smaken på ølet ved bruk av naturlig karbonisering. CrafTap bevarer kvaliteten ved å eliminere oksidering som man får ved bruk av vanlige tappetårn.
*Når brukt sammen med CraftPad light
Høy produktivitet
100
100 flasker kan fylles
i timen.
Bedre økonomi 20% økning av profitt rapportert
Kundetilfredshet
+100%
kundene dine fortjener
best kvalitet
The quality-conscious bottle shop will focus on fresh beer. To insure that customers get a fresh, delicious, properly poured growler of beer, 99 Bottles will use an innovative device: the PEGAS CraftTap dispenser.
PEGAS CrafTap saturate the inside of the growler with CO2, preventing loss of carbonation, so sealed growlers are viable for three weeks or longer.
The system reduces the amount of foam, allowing us to focus on beer fills, rather than product waste. It’s quite cost efficient for us and the customer.
Kidding aside, this looks like a very smart way to fill growlers!
Craig and Tiffany Adamowski, owners of 99 Bottles.
After we saw the video about PEGAS CrafTap on YouTube for the first time we understood that this device had to be included in our product range. For us as producers of devices for microbreweries this counter pressure filler is optimal for our delivery program. CrafTap corresponds to the demands we make to our own products like easy operation and service and good design. We tested different bottle fillers but only CrafTap could satisfy us. It is technically perfect and has no problems while daily using. We and especially our customers really admire it!
Picobier (Ingenieurbuero Prodesign GmbH), Germany
"We've purchased the CrafTap to firstly test it on the beer show and then start to promote it in Netherlands. The test was ok. But we change a thing. Better is first wash the bottle with CO2 and a open pressure release valve and after 2 seconds close the pressure release valve.
Then you have 95% of your O2 out of the bottle. And the best is to tell the customers to fill the bottles with beer of 1-3°C. Then you fill it the best! The introduction of CrafTap in the Netherlands was good and there were a lot of brewers who were interested. So now we think we can sell a lot of CrafTaps!"
Brouwtechniek Nederland, Netherlands.
#1 Det foretrukne valget for Growler fylling
1 200 000 Mer enn 1.2 millioner PEGAS enheter fyller øl globalt